Loading the content...
Navigation

MAXON – 700 – SAFETY VALVE

‹Return to Previous Page

Related Products

Quick View

GUIDE TUBE – OVENPAK 2

MAXON guide tubes allow for the simple installation of either UV flame detection cells of flame rods. Designed to penetrate through the entire burner to visualize the flame directly of the nozzle tip, the carbon steel guide tubes are available with either NPT or TEC end connections.  
QUOTE REQUEST
Quick View

OBSERVATION GLASS GASKET – OVENPAK 2

 
QUOTE REQUEST
Quick View

FILTER ELEMENTS – OVENPACK 2

MAXON red foam filters allow for the removal of particulates from the combustion air stream. The filters are specifically designed for the combustion industry and include a flame retardant to ensure safe operation in a variety of applications.  
QUOTE REQUEST
Quick View

CONTROL MOTOR – OVENPAK 2

MAXON Recommended control motors include, but are not limited to the following. Contact PROMAX COMBUSTION for help in selecting the best control motor for your application.
  1. SMARTLINK DS.
  2. Honeywell ControLinks.
  3. Honeywell Modutrol IV.
 
QUOTE REQUEST
Quick View

MAXON SPARK IGNITOR – OVENPAK 1

MAXON spark ignitors for the Ovenpak 1 have been engineered specially for industrial burner applications. Quality construction provides maximum service life and dependable operation to keep your heating process running smoothly. Consult technical bulletins to ensure your setup is per manufacturer`s recommendation for your specific OP2 model.  
QUOTE REQUEST
Quick View

MAXON LIMIT SWITCH KIT- OVENPAK 1

MAXON limit switches for the Ovenpak 1 allow for safety interlock confirmation for light-off, high fire and purge positions as required by today's gas codes. The kit includes activation cams, mounting brackets and LOW or HIGH/LOW weatherproof limit switches.  
QUOTE REQUEST
Quick View

HOUSING GASKET – OVENPAK 2

MAXON housing gasket is to be installed between the two (2) main casing sections of the burner. Designed to provide an airtight seal between the casing pieces, this gasket should provide a worry free seal under a variety of environmental conditions. The gasket is considered a consumable item and should be replaced during regularly scheduled burner maintenance.  
QUOTE REQUEST
Maxon Mixing Cone Quick View

MAXON MIXING CONE – OVENPAK 1

"MAXON mixing cones for the Ovenpak 1 are availble in 3 versions:
  • Standard cast iron mixing cone, suitable for most process applications.
  • Excess air cast iron mixing cone, allowing +/-10% more air through the burner with the same overall pressure drop.
  • Stainless steel mixing cone, suitable for high temperature or highly corrosive applications.
 
QUOTE REQUEST
Quick View

BURNER SLEEVE GASKET – OVENPAK 2

MAXON burner sleeve gasket is to be installed between the main burner flanges and the oven wall. Designed to provide an airtight seal around the burner flange under the most extreme conditions, the burner sleeve gasket must be installed on all applications with position combustion chamber pressures. The gasket is considered a consumable item and should be replaced during regularly scheduled burner maintenance.  
QUOTE REQUEST
Quick View

GAS INLET GASKET – OVENPAK 2

MAXON gas inlet gasket is to be installed on the gas inlet flange of the burner casing. Designed to provide an gastight seal around the inlet flange of the burner casing, this gasket should provide a worry free seal under a variety of environmental conditions. The gasket is considered a consumable item and should be replaced during regularly scheduled burner maintenance.  
QUOTE REQUEST
Back to top