Product brand
Related Products
Quick View
BLOWER MOTOR – OVENPAK 2
MAXON blower motors are available in with the following voltages:
230/460/3/60
575/3/60
115/1/60
Quick View
OBSERVATION GLASS – ROUND – OVENPAK 2
MAXON observation glass allows for proper viewing of flame quality through the back plate of the burner. Includes two (2) sealing o-rings and is available in standard plexiglass or high temperature Quartz models.
Quick View
BURNER SLEEVE GASKET – OVENPAK 2
MAXON burner sleeve gasket is to be installed between the main burner flanges and the oven wall. Designed to provide an airtight seal around the burner flange under the most extreme conditions, the burner sleeve gasket must be installed on all applications with position combustion chamber pressures. The gasket is considered a consumable item and should be replaced during regularly scheduled burner maintenance.
Quick View
BLOWER GASKET – OVENPAK 2
MAXON blower gasket is to be installed on the discharge flange of the integral combustion air blower. Designed to provide an airtight seal around the outlet of the blower flange, this gasket should provide a worry free seal under a variety of environmental conditions. The gasket is considered a consumable item and should be replaced during regularly scheduled burner maintenance.
Quick View
PILOT ORIFICE – OVENPAK 2
MAXON pilot orifice valve allows for minute adjustments to the pilot capacity to ensure reliable and strong lightoff under a variety of operating conditions.
- Brass body construction.
- 3/8" threaded inlet and outlet connections.
- the orifice is available in both standard and high capacity models.
Quick View
MAXON BRACKET & LINKAGE – OVENPAK 1
MAXON linkage kits allow for the direct coupling of the internal air/gas butterfly valves of the Ovenpak 1 burner series.
Quick View
CONTROL MOTOR – OVENPAK 2
MAXON Recommended control motors include, but are not limited to the following. Contact PROMAX COMBUSTION for help in selecting the best control motor for your application.
- SMARTLINK DS.
- Honeywell ControLinks.
- Honeywell Modutrol IV.
Quick View
FLAME ROD – OVENPAK 2
MAXON rectification rods (flame rods) have been engineered specially for industrial burner applications. Quality construction provides maximum service life and dependable operation to keep your heating process running smoothly. Consult technical bulletins to ensure your setup is per manufacturer`s recommendation for your specific OP2 model.
DOWNLOADS:
Spark Ignitors and Flame Rods
Quick View
GUIDE TUBE – OVENPAK 2
MAXON guide tubes allow for the simple installation of either UV flame detection cells of flame rods. Designed to penetrate through the entire burner to visualize the flame directly of the nozzle tip, the carbon steel guide tubes are available with either NPT or TEC end connections.
Quick View
MAXON GUIDE TUBE – OVENPAK 1
MAXON guide tubes for the Ovenpak 1 allow for the simple installation of either UV flame detection cells of flame rods. Designed to penetrate through the entire burner to visualize the flame directly of the nozzle tip, the carbon steel guide tubes are available with either NPT or TEC end connections.