Loading the content...
Navigation
Account

IMPELLER – OVENPAK 2

‹Return to Previous Page

Related Products

Quick View

MAXON FLAME ROD – OVENPAK 1

MAXON rectification rods (flame rods) for the Ovenpak 1 have been engineered specially for industrial burner applications. Quality construction provides maximum service life and dependable operation to keep your heating process running smoothly. Consult technical bulletins to ensure your setup is per manufacturer`s recommendation for your specific OP2 model.
QUOTE REQUEST

DOWNLOADS:

Quick View

MIXING CONE – OVENPAK 2

"MAXON mixing cones are availble in 3 versions:
  • Standard cast iron mixing cone, suitable for most process applications.
  • Excess air cast iron mixing cone, allowing +/-10% more air through the burner with the same overall pressure drop.
  • Stainless steel mixing cone, suitable for high temperature or highly corrosive applications.
 
QUOTE REQUEST
Quick View

CONTROL MOTOR – OVENPAK 2

MAXON Recommended control motors include, but are not limited to the following. Contact PROMAX COMBUSTION for help in selecting the best control motor for your application.
  1. SMARTLINK DS.
  2. Honeywell ControLinks.
  3. Honeywell Modutrol IV.
 
QUOTE REQUEST
Quick View

GAS INLET GASKET – OVENPAK 2

MAXON gas inlet gasket is to be installed on the gas inlet flange of the burner casing. Designed to provide an gastight seal around the inlet flange of the burner casing, this gasket should provide a worry free seal under a variety of environmental conditions. The gasket is considered a consumable item and should be replaced during regularly scheduled burner maintenance.  
QUOTE REQUEST
Quick View

OBSERVATION GLASS GASKET – OVENPAK 2

 
QUOTE REQUEST
Quick View

BLOWER GASKET – OVENPAK 2

MAXON blower gasket is to be installed on the discharge flange of the integral combustion air blower. Designed to provide an airtight seal around the outlet of the blower flange, this gasket should provide a worry free seal under a variety of environmental conditions. The gasket is considered a consumable item and should be replaced during regularly scheduled burner maintenance.  
QUOTE REQUEST
Quick View

FLAME ROD – OVENPAK 2

MAXON rectification rods (flame rods) have been engineered specially for industrial burner applications. Quality construction provides maximum service life and dependable operation to keep your heating process running smoothly. Consult technical bulletins to ensure your setup is per manufacturer`s recommendation for your specific OP2 model.
QUOTE REQUEST

DOWNLOADS:

Quick View

OBSERVATION GLASS – ROUND – OVENPAK 2

MAXON observation glass allows for proper viewing of flame quality through the back plate of the burner. Includes two (2) sealing o-rings and is available in standard plexiglass or high temperature Quartz models.  
QUOTE REQUEST
Quick View

PILOT ORIFICE – OVENPAK 2

MAXON pilot orifice valve allows for minute adjustments to the pilot capacity to ensure reliable and strong lightoff under a variety of operating conditions.
  • Brass body construction.
  • 3/8" threaded inlet and outlet connections.
  • the orifice is available in both standard and high capacity models.
QUOTE REQUEST
Quick View

MAXON SPARK IGNITOR – OVENPAK 1

MAXON spark ignitors for the Ovenpak 1 have been engineered specially for industrial burner applications. Quality construction provides maximum service life and dependable operation to keep your heating process running smoothly. Consult technical bulletins to ensure your setup is per manufacturer`s recommendation for your specific OP2 model.  
QUOTE REQUEST
Back to top