OVENPAK I PARTS
Quick View
BLOWER MOTOR – OVENPAK 1
MAXON blower motors are available in with the following voltages:
230/460/3/60
575/3/60
115/1/60
Quick View
BURNER SLEEVE GASKET – OVENPAK 1
MAXON burner sleeve gasket is to be installed between the main burner flanges and the oven wall. Designed to provide an airtight seal around the burner flange under the most extreme conditions, the burner sleeve gasket must be installed on all applications with position combustion chamber pressures. The gasket is considered a consumable item and should be replaced during regularly scheduled burner maintenance.
Quick View
FIRING SLEEVE – OVENPAK 1
MAXON firing sleeves are available in 5 versions:
- Standard sleeve is 8″ long, made of #310 SS, and is suitable for downstream temperatures up to 1000°F (538°C).
- For higher velocities, specify 12″ long sleeve made of #310 SS for downstream temperatures up to 1000°F (538°C).
- For higher downstream temperatures between 1000°F (538°C) and 1500°F (816°C), specify 8″ long, #RA 330 SS sleeve.
- For higher velocities and downstream temperatures between 1000°F (538°C) and 1500°F (816°C), specify 12″ long, #RA 330 SS sleeve.
- For refractory lined furnaces, specify 8"" refractory lined sleeve. "
Quick View
GAS NOZZLE – OVENPAK 1
MAXON gas nozzles are designed for the most rugged industrial applications. Engineered to develop a stable and high turndown flame pattern, nozzles are available for
- NATURAL GAS
- PROPANE
- BUTANE
All nozzles are also available with nickel coating for higly corrosive environments.
Quick View
MAXON BLOWER GASKET – OVENPAK 1
MAXON blower gasket for the ovenpak 1 is to be installed on the discharge flange of the integral combustion air blower. Designed to provide an airtight seal around the outlet of the blower flange, this gasket should provide a worry free seal under a variety of environmental conditions. The gasket is considered a consumable item and should be replaced during regularly scheduled burner maintenance.
Quick View
MAXON BRACKET & LINKAGE – OVENPAK 1
MAXON linkage kits allow for the direct coupling of the internal air/gas butterfly valves of the Ovenpak 1 burner series.
Quick View
MAXON FILTER ELEMENTS – OVENPACK 1
MAXON red foam filters allow for the removal of particulates from the combustion air stream. The filters are specifically designed for the combustion industry and include a flame retardant to ensure safe operation in a variety of applications.
Quick View
MAXON FLAME ROD – OVENPAK 1
MAXON rectification rods (flame rods) for the Ovenpak 1 have been engineered specially for industrial burner applications. Quality construction provides maximum service life and dependable operation to keep your heating process running smoothly. Consult technical bulletins to ensure your setup is per manufacturer`s recommendation for your specific OP2 model.
DOWNLOADS:
Quick View
MAXON GUIDE TUBE – OVENPAK 1
MAXON guide tubes for the Ovenpak 1 allow for the simple installation of either UV flame detection cells of flame rods. Designed to penetrate through the entire burner to visualize the flame directly of the nozzle tip, the carbon steel guide tubes are available with either NPT or TEC end connections.
Quick View
MAXON IMPELLER – OVENPAK 1
MAXON combustion air impellars are built specifically for the Ovepak series of burners. Aluminum die cast, radial blade and balanced for mounting in MAXON integral combustion air blowers, the impellars are available in both ANSI and ISO models.
Quick View
MAXON INTERNAL LINKAGE KIT – OVENPAK 1
MAXON linkage kits allow for the direct coupling of the internal air/gas butterfly valves of the Ovenpak 1 burner series.
The kit includes:
- Butterfly dics
- Linkage arms
- Pins
- Seals
- And bushings to allow fo the complete replacement of the control internals.
Quick View
MAXON LIMIT SWITCH KIT- OVENPAK 1
MAXON limit switches for the Ovenpak 1 allow for safety interlock confirmation for light-off, high fire and purge positions as required by today's gas codes. The kit includes activation cams, mounting brackets and LOW or HIGH/LOW weatherproof limit switches.
Quick View
MAXON MIXING CONE – OVENPAK 1
"MAXON mixing cones for the Ovenpak 1 are availble in 3 versions:
- Standard cast iron mixing cone, suitable for most process applications.
- Excess air cast iron mixing cone, allowing +/-10% more air through the burner with the same overall pressure drop.
- Stainless steel mixing cone, suitable for high temperature or highly corrosive applications.
Quick View
MAXON OBSERVATION GLASS – RECTANGULAR – OVENPAK 1
MAXON observation glass allows for proper viewing of flame quality through the back plate of the burner. Includes two (2) sealing o-rings and is available in standard plexiglass or high temperature Quartz models.
Quick View
MAXON OBSERVATION GLASS – SQUARE – OVENPAK 1
MAXON observation glass allows for proper viewing of flame quality through the back plate of the burner. Includes two (2) sealing o-rings and is available in standard plexiglass or high temperature Quartz models.
Quick View
MAXON PILOT ORIFICE – OVENPAK 1
MAXON pilot orifice valve for the Ovenpak 2 allows for minute adjustments to the pilot capacity to ensure reliable and strong lightoff under a variety of operating conditions.
- Brass body construction.
- 3/8" threaded inlet and outlet connections.
- the orifice is available in both standard and high capacity models.
Quick View
MAXON SPARK IGNITOR – OVENPAK 1
MAXON spark ignitors for the Ovenpak 1 have been engineered specially for industrial burner applications. Quality construction provides maximum service life and dependable operation to keep your heating process running smoothly. Consult technical bulletins to ensure your setup is per manufacturer`s recommendation for your specific OP2 model.
Quick View
OVEN WALL GASKET – OVENPAK 1
Maxon oven wall gasket is to be installed in between the burner firing sleeve and your furnace oven wall. Designed to provide an airtight seal between the inside and outside of your combustion chamber. The gasket is considered a consumable items and should be replaced during regularly scheduled burner maintenance.