Quick View
BLOWER GASKET – OVENPAK 2
MAXON blower gasket is to be installed on the discharge flange of the integral combustion air blower. Designed to provide an airtight seal around the outlet of the blower flange, this gasket should provide a worry free seal under a variety of environmental conditions. The gasket is considered a consumable item and should be replaced during regularly scheduled burner maintenance.
Quick View
BLOWER MOTOR – OVENPAK 1
MAXON blower motors are available in with the following voltages:
230/460/3/60
575/3/60
115/1/60
Quick View
BLOWER MOTOR – OVENPAK 2
MAXON blower motors are available in with the following voltages:
230/460/3/60
575/3/60
115/1/60
Quick View
BURNER SLEEVE GASKET – MAXON OVENPAK 2
MAXON burner sleeve gasket is to be installed between the main burner flanges and the oven wall. Designed to provide an airtight seal around the burner flange under the most extreme conditions, the burner sleeve gasket must be installed on all applications with position combustion chamber pressures. The gasket is considered a consumable item and should be replaced during regularly scheduled burner maintenance.
Quick View
BURNER SLEEVE GASKET – OVENPAK 1
MAXON burner sleeve gasket is to be installed between the main burner flanges and the oven wall. Designed to provide an airtight seal around the burner flange under the most extreme conditions, the burner sleeve gasket must be installed on all applications with position combustion chamber pressures. The gasket is considered a consumable item and should be replaced during regularly scheduled burner maintenance.
Quick View
CONTROL MOTOR – OVENPAK 2
MAXON Recommended control motors include, but are not limited to the following. Contact PROMAX COMBUSTION for help in selecting the best control motor for your application.
- SMARTLINK DS.
- Honeywell ControLinks.
- Honeywell Modutrol IV.
Quick View
FILTER ELEMENTS – OVENPACK 2
MAXON red foam filters allow for the removal of particulates from the combustion air stream. The filters are specifically designed for the combustion industry and include a flame retardant to ensure safe operation in a variety of applications.
Quick View
FIRING SLEEVE – OVENPAK 1
MAXON firing sleeves are available in 5 versions:
- Standard sleeve is 8″ long, made of #310 SS, and is suitable for downstream temperatures up to 1000°F (538°C).
- For higher velocities, specify 12″ long sleeve made of #310 SS for downstream temperatures up to 1000°F (538°C).
- For higher downstream temperatures between 1000°F (538°C) and 1500°F (816°C), specify 8″ long, #RA 330 SS sleeve.
- For higher velocities and downstream temperatures between 1000°F (538°C) and 1500°F (816°C), specify 12″ long, #RA 330 SS sleeve.
- For refractory lined furnaces, specify 8"" refractory lined sleeve. "
Quick View
FIRING SLEEVE – OVENPAK 2
MAXON firing sleeves are available in 5 versions:
- Standard sleeve is 8″ long, made of #310 SS, and is suitable for downstream temperatures up to 1000°F (538°C).
- For higher velocities, specify 12″ long sleeve made of #310 SS for downstream temperatures up to 1000°F (538°C).
- For higher downstream temperatures between 1000°F (538°C) and 1500°F (816°C), specify 8″ long, #RA 330 SS sleeve.
- For higher velocities and downstream temperatures between 1000°F (538°C) and 1500°F (816°C), specify 12″ long, #RA 330 SS sleeve.
- For refractory lined furnaces, specify 8"" refractory lined sleeve. "
Quick View
FLAME ROD – OVENPAK 2
MAXON rectification rods (flame rods) have been engineered specially for industrial burner applications. Quality construction provides maximum service life and dependable operation to keep your heating process running smoothly. Consult technical bulletins to ensure your setup is per manufacturer`s recommendation for your specific OP2 model.
DOWNLOADS:
Quick View
GAS INLET GASKET – OVENPAK 2
MAXON gas inlet gasket is to be installed on the gas inlet flange of the burner casing. Designed to provide an gastight seal around the inlet flange of the burner casing, this gasket should provide a worry free seal under a variety of environmental conditions. The gasket is considered a consumable item and should be replaced during regularly scheduled burner maintenance.
Quick View
GAS NOZZLE – OVENPAK 1
MAXON gas nozzles are designed for the most rugged industrial applications. Engineered to develop a stable and high turndown flame pattern, nozzles are available for
- NATURAL GAS
- PROPANE
- BUTANE
All nozzles are also available with nickel coating for higly corrosive environments.
Quick View
GAS NOZZLE – OVENPAK 2
MAXON gas nozzles are designed for the most rugged industrial applications. Engineered to develop a stable and high turndown flame pattern, nozzles are available for
- NATURAL GAS
- PROPANE
- BUTANE
All nozzles are also available with nickel coating for higly corrosive environments.
Quick View
GUIDE TUBE – OVENPAK 2
MAXON guide tubes allow for the simple installation of either UV flame detection cells of flame rods. Designed to penetrate through the entire burner to visualize the flame directly of the nozzle tip, the carbon steel guide tubes are available with either NPT or TEC end connections.
Quick View
HOUSING GASKET – OVENPAK 2
MAXON housing gasket is to be installed between the two (2) main casing sections of the burner. Designed to provide an airtight seal between the casing pieces, this gasket should provide a worry free seal under a variety of environmental conditions. The gasket is considered a consumable item and should be replaced during regularly scheduled burner maintenance.
Quick View
IMPELLER – OVENPAK 2
MAXON combustion air impellars are built specifically for the Ovepak series of burners. Aluminum die cast, radial blade and balanced for mounting in MAXON integral combustion air blowers, the impellars are available in both ANSI and ISO models.
Quick View
LINKAGE KIT – OVENPAK 2
MAXON linkage kits allow for the direct coupling of the internal air/gas butterfly valves of the Ovenpak 2 burner series.
The kit includes:
- Butterfly dics
- Linkage arms
- Pins
- Seals
- And bushings to allow fo the complete replacement of the control internals.
Quick View
MAXON – 4700 SERIES – SAFETY VALVE
Maxon general purpose electrically actuated valves shut off oil lines in less than one second. A variety of body materials and body connections provide reliable operation even for highly corrosive fuels and for oxygen with Maxon's long-lasting metal-to-metal seating.
MAXON – 4700 - PARTS
SOLENOID MODELS AVAILABLE:
- 24 VDC SOLENOID
- 24 VAC SOLENOID
- 46 VAC SOLENOID
- 100 VAC SOLENOID
- 120 VAC SOLENOID
- 208 VAC SOLENOID
- 230 VAC SOLENOID
- 345 VAC SOLENOID
- 460 VAC SOLENOID
MOTOR MODELS AVAILABLE:
- 2,5 SEC, 120 VAC / 50 & 60 HZ MOTOR
- 2,5 SEC, 230VAC / 50 & 60 HZ MOTOR
- 6 SEC, 120 VAC / 50 & 60 HZ MOTOR
- 6 SEC, 230 VAC / 50 & 60 HZ MOTOR
SWITCH KIT MODELS AVAILABLE:
- VOS 1 LIMIT SWITCH
- VOS 2 LIMIT SWITCH
- VCS1 LIMIT SWITCH
- VCS2 LIMIT SWITCH
Quick View
MAXON – 700 – SAFETY VALVE
Maxon general purpose electrically actuated valves shut off oil lines in less than one second. A variety of body materials and body connections provide reliable operation even for highly corrosive fuels and for oxygen with Maxon’s long-lasting metal-to-metal seating.
MAXON – 700 - PARTS
SOLENOID MODELS AVAILABLE:
- 24 VDC SOLENOID
- 24 VAC SOLENOID
- 46 VAC SOLENOID
- 100 VAC SOLENOID
- 120 VAC SOLENOID
- 208 VAC SOLENOID
- 230 VAC SOLENOID
- 345 VAC SOLENOID
- 460 VAC SOLENOID
LIMIT SWITCH MODELS AVAILABLE:
- VCS 1 LIMIT SWITCH
- VCS 2 LIMIT SWITCH
- VCS1 / VOS 1 LIMIT SWITCH
- VCS2 / VOS2 LIMIT SWITH
Quick View
MAXON – 8111 – SAFETY VALVE
MAXON Series 8000 Valves are pneumatically actuated valves with a powerful closing spring and a large, top-mounted 360-degree open-shut visual position indicator. The Series 8000 can be ordered with a wide range of internal trim options to handle general purpose or corrosive gases and comes in a compact, space-saving design. The Series 8000 provides simple installation and low maintenance for trouble-free, long-term uninterruped operation.
MAXON – 8700 - PARTS
SWITCH KIT MODELS AVAILABLE:
- VOS1 / VCS1 SWITCH KIT
- VOS2 / VCS2 SWITCH KIT
SOLENOID MODELS AVAILABLE:
- SOLENOID 24 VDC
- SOLENOID 120 VAC / 50 HZ
- SOLENOID 120 VAC / 60 HZ
- SOLENOID 230 VAC / 50 HZ
- SOLENOID 230 VAC / 60 HZ
VISUAL INDICATOR MODELS AVAILABLE:
- VISUAL INDICATOR - RED CLOSED
- VISUAL INDICATOR - RED OPEN
- VISUAL INDICATOR - YELLOW OPEN