Quick View
MAXON – 8700 SERIES – SAFETY VALVE
Maxon general purpose electrically actuated valves shut off oil lines in less than one second. A variety of body materials and body connections provide reliable operation even for highly corrosive fuels and for oxygen with Maxon's long-lasting metal-to-metal seating.
MAXON – 8700 - PARTS
MOTOR MODELS AVAILABLE:
- 6 SEC, 120 VAC / 50 & 60 Hz MOTOR
- 6 SEC, 230 VAC / 50 & 60 Hz MOTOR
SWITCH KIT MODELS AVAILABLE:
- VOS 1 LIMIT SWITCH
- VOS 2 LIMIT SWITCH
- VCS1 LIMIT SWITCH
- VCS2 LIMIT SWITCH
CIRCUIT BOARD MODELS AVAILABLE:
- 120 VAC CIRCUIT BOARD
- 230 VAC CIRCUIT BOARD
CLUTCH KIT MODELS AVAILABLE:
- VOS 1 LIMIT SWITCH
- VOS 2 LIMIT SWITCH
- VCS1 LIMIT SWITCH
- VCS2 LIMIT SWITCH
Quick View
MAXON – MA11 – SAFETY VALVE
MAXON's Electro-Pneumatic Shut-Off Valves are ideally suited for reliable shut off of various fuel gases and liquids. MAXON gas valves require only a power source from your burner management system or DCS and an instrument air feed. MAXON shut off valve operating pressures and valve Cv's are among the highest available in the industry meaning you can move more fuel in smaller size valves than competitive products.
MAXON – MA11 - PARTS
SOLENOID MODELS AVAILABLE:
- SOLENOID 24 VDC
- SOLENOID 120 VDC
- SOLENOID 120 VAC / 50 HZ
- SOLENOID 120 VAC / 60 HZ
- SOLENOID 208 VAC / 50 HZ
- SOLENOID 230 VAC / 50 HZ
- SOLENOID 230 VAC / 60 HZ
MOTOR MODELS AVAILABLE:
- 2,5 SECOND MOTOR, 120VAC / 50 & 60HZ
- 2,5 SECOND MOTOR, 230VAC / 50 & 60HZ
- 6 SECOND MOTOR, 230VAC / 50 & 60HZ
- 6 SECOND MOTOR, 230VAC / 50 & 60HZ
- 6 SECOND MOTOR, 24VDC
SWITCH KIT MODELS AVAILABLE:
- SWITCH KIT VOS1/NONE
- SWITCH KIT VOS1/VCS1
- SWITCH KIT VOS2/VCS1
- SWITCH KIT VOS2/VCS2
- SWITCH KIT VOS1HC/VCS1HC
Quick View
MAXON – MA21 – SAFETY VALVE
MAXON's Electro-Pneumatic Shut-Off Valves are ideally suited for reliable shut off of various fuel gases and liquids. MAXON gas valves require only a power source from your burner management system or DCS and an instrument air feed. MAXON shut off valve operating pressures and valve Cv's are among the highest available in the industry meaning you can move more fuel in smaller size valves than competitive products.
MAXON – MA21 - PARTS
SOLENOID MODELS AVAILABLE:
- SOLENOID 24 VDC
- SOLENOID 120 VDC
- SOLENOID 120 VAC / 50 HZ
- SOLENOID 120 VAC / 60 HZ
- SOLENOID 208 VAC / 50 HZ
- SOLENOID 230 VAC / 50 HZ
- SOLENOID 230 VAC / 60 HZ
MOTOR MODELS AVAILABLE:
- 2,5 SECOND MOTOR, 120VAC / 50 & 60HZ
- 2,5 SECOND MOTOR, 230VAC / 50 & 60HZ
- 6 SECOND MOTOR, 230VAC / 50 & 60HZ
- 6 SECOND MOTOR, 230VAC / 50 & 60HZ
- 6 SECOND MOTOR, 24VDC
SWITCH KIT MODELS AVAILABLE:
- VOS1/NONE SWITCH KIT
- VOS1/VCS1 SWITCH KIT
- VCS2/VOS1 SWITCH KIT
- VOS2/VCS2 SWITCH KIT
- VOS1HC/VCS1HC SWITCH KIT
Quick View
MAXON – MM11 – SAFETY VALVE
MAXON's Electro-Pneumatic Shut-Off Valves are ideally suited for reliable shut off of various fuel gases and liquids. MAXON gas valves require only a power source from your burner management system or DCS and an instrument air feed. MAXON shut off valve operating pressures and valve Cv's are among the highest available in the industry meaning you can move more fuel in smaller size valves than competitive products.
MAXON – MM11 - PARTS
SOLENOID MODELS AVAILABLE:
- SOLENOID 24 VDC
- SOLENOID 120 VDC
- SOLENOID 120 VAC / 50 HZ
- SOLENOID 120 VAC / 60 HZ
- SOLENOID 208 VAC / 50 HZ
- SOLENOID 230 VAC / 50 HZ
- SOLENOID 230 VAC / 60 HZ
SWITCH KIT MODELS AVAILABLE:
- VOS1/NONE SWITCH KIT
- VOS1/VCS1 SWITCH KIT
- VCS2/VOS1 SWITCH KIT
- VOS2/VCS2 SWITCH KIT
- VOS1HC/VCS1HC SWITCH KIT
Quick View
MAXON – MM21 – SAFETY VALVE
MAXON's Electro-Pneumatic Shut-Off Valves are ideally suited for reliable shut off of various fuel gases and liquids. MAXON gas valves require only a power source from your burner management system or DCS and an instrument air feed. MAXON shut off valve operating pressures and valve Cv's are among the highest available in the industry meaning you can move more fuel in smaller size valves than competitive products.
MAXON – MM21 - PARTS
SOLENOID MODELS AVAILABLE:
- SOLENOID 24 VDC
- SOLENOID 120 VDC
- SOLENOID 120 VAC / 50 HZ
- SOLENOID 120 VAC / 60 HZ
- SOLENOID 208 VAC / 50 HZ
- SOLENOID 230 VAC / 50 HZ
- SOLENOID 230 VAC / 60 HZ
SWITCH KIT MODELS AVAILABLE:
- SWITCH KIT VOS1/NONE
- SWITCH KIT VOS1/VCS1
- SWITCH KIT VOS2/VCS1
- SWITCH KIT VOS2/VCS2
- SWITCH KIT VOS1HC/VCS1HC
Quick View
MAXON BLOWER GASKET – OVENPAK 1
MAXON blower gasket for the ovenpak 1 is to be installed on the discharge flange of the integral combustion air blower. Designed to provide an airtight seal around the outlet of the blower flange, this gasket should provide a worry free seal under a variety of environmental conditions. The gasket is considered a consumable item and should be replaced during regularly scheduled burner maintenance.
Quick View
MAXON BRACKET & LINKAGE – OVENPAK 1
MAXON linkage kits allow for the direct coupling of the internal air/gas butterfly valves of the Ovenpak 1 burner series.
Quick View
MAXON FILTER ELEMENTS – OVENPACK 1
MAXON red foam filters allow for the removal of particulates from the combustion air stream. The filters are specifically designed for the combustion industry and include a flame retardant to ensure safe operation in a variety of applications.
Quick View
MAXON FLAME ROD – OVENPAK 1
MAXON rectification rods (flame rods) for the Ovenpak 1 have been engineered specially for industrial burner applications. Quality construction provides maximum service life and dependable operation to keep your heating process running smoothly. Consult technical bulletins to ensure your setup is per manufacturer`s recommendation for your specific OP2 model.
DOWNLOADS:
Quick View
MAXON GUIDE TUBE – OVENPAK 1
MAXON guide tubes for the Ovenpak 1 allow for the simple installation of either UV flame detection cells of flame rods. Designed to penetrate through the entire burner to visualize the flame directly of the nozzle tip, the carbon steel guide tubes are available with either NPT or TEC end connections.
Quick View
MAXON IMPELLER – OVENPAK 1
MAXON combustion air impellars are built specifically for the Ovepak series of burners. Aluminum die cast, radial blade and balanced for mounting in MAXON integral combustion air blowers, the impellars are available in both ANSI and ISO models.
Quick View
MAXON INTERNAL LINKAGE KIT – OVENPAK 1
MAXON linkage kits allow for the direct coupling of the internal air/gas butterfly valves of the Ovenpak 1 burner series.
The kit includes:
- Butterfly dics
- Linkage arms
- Pins
- Seals
- And bushings to allow fo the complete replacement of the control internals.
Quick View
MAXON LIMIT SWITCH KIT- OVENPAK 1
MAXON limit switches for the Ovenpak 1 allow for safety interlock confirmation for light-off, high fire and purge positions as required by today's gas codes. The kit includes activation cams, mounting brackets and LOW or HIGH/LOW weatherproof limit switches.
Quick View
MAXON MIXING CONE – OVENPAK 1
"MAXON mixing cones for the Ovenpak 1 are availble in 3 versions:
- Standard cast iron mixing cone, suitable for most process applications.
- Excess air cast iron mixing cone, allowing +/-10% more air through the burner with the same overall pressure drop.
- Stainless steel mixing cone, suitable for high temperature or highly corrosive applications.
Quick View
MAXON OBSERVATION GLASS – RECTANGULAR – OVENPAK 1
MAXON observation glass allows for proper viewing of flame quality through the back plate of the burner. Includes two (2) sealing o-rings and is available in standard plexiglass or high temperature Quartz models.
Quick View
MAXON OBSERVATION GLASS – SQUARE – OVENPAK 1
MAXON observation glass allows for proper viewing of flame quality through the back plate of the burner. Includes two (2) sealing o-rings and is available in standard plexiglass or high temperature Quartz models.
Quick View
MAXON PILOT ORIFICE – OVENPAK 1
MAXON pilot orifice valve for the Ovenpak 2 allows for minute adjustments to the pilot capacity to ensure reliable and strong lightoff under a variety of operating conditions.
- Brass body construction.
- 3/8" threaded inlet and outlet connections.
- the orifice is available in both standard and high capacity models.
Quick View
MAXON SPARK IGNITOR – OVENPAK 1
MAXON spark ignitors for the Ovenpak 1 have been engineered specially for industrial burner applications. Quality construction provides maximum service life and dependable operation to keep your heating process running smoothly. Consult technical bulletins to ensure your setup is per manufacturer`s recommendation for your specific OP2 model.
Quick View
MIXING CONE – OVENPAK 2
"MAXON mixing cones are availble in 3 versions:
- Standard cast iron mixing cone, suitable for most process applications.
- Excess air cast iron mixing cone, allowing +/-10% more air through the burner with the same overall pressure drop.
- Stainless steel mixing cone, suitable for high temperature or highly corrosive applications.
Quick View
MOTOR BRACKET – OVENPAK 2
MAXON Connecting brackets and linkage assemblies are available in 4 main versions:
- Maxon SMARTLINK DS drive motors.
- Honeywell MODUTROL drive motors.
- Honeywell HERCULINE drive motors.
- Barber-Colemand drive motors.
Special assemblies can also be engineering upon request.